Stream in decklink card

[svijikumar]

Decklink video capture ---> smart tee --->elecard  mpeg2 video encoder 16k ---> elecard  mpeg multiplexer ---> elecard   Nw Stream

ths graph use to the decklink video capture stream.

i use the code from the  Elecard Codec .NET SDK G4 --> simple capture stream coding.

im get the decklink audio capture. if i press decklink audio capture means decklink video not coming.

only one capture is possible the same.

i need the decklink audio and video capture stream.

thank you,
viji

[IrinaM]

Hello svijikumar,

The SimpleCapture sample application demonstrate how to capture video or audio from capture device using the Elecard filters and the Microsoft ICaptureGraphBuilder2 interface.

If you need capture video and audio from different capture devices you should build following graph:
Decklink video capture->elecard  mpeg2 video encoder 16k->
                                                                                   elecard  mpeg multiplexer ---> elecard   Nw Stream
Decklink audio capture-> elecard  mpeg audio encoder ->

[svijikumar]

hi..
thank you, for u reply .

i know that graph. please send the coding of this.

[svijikumar]

Decklink video capture->elecard mpeg2 video encoder 16k->
elecard mpeg multiplexer ---> elecard Sink Filter
Decklink audio capture-> elecard mpeg audio encoder ->


This Graph is working fine.

how can i add the decklink audio capture device.

send me any sample code and where i can add that code.

[IrinaM]

svijikumar,

You can use the CaptureGraph class for one capture device only. I recommend you to use the EncoderGraph class.
You should create all necessary filters, using the Filter class and/or the Device class, add them to the graph, and connect. Sample applications demonstrate how to build graphs for different cases.

If you are interested in custom development, please feel free to contact our sales team

[Xsi]

Hi, is it possible to add Decklink Capture filter via Elecard SDK using AddFilter function? Are there any conditions that I have to be aware to add third party filters and us them as a source filter?

[IrinaM]

Hello Xsi,
Sorry for such a delay in replying to you.
Yes, it is possible, if you know CLSID of this component.

[Xsi]

Hi, Thank you for the tip.

Now we have another question. Decklink audio capture filter is outputting only one single pin with FORMAT_WaveFormatEx type. This pin contains few audio channels. We want to take every channel separately and group it into stereo pairs then encode with Elecard AAC filter. Is there a filter that can demultiplex waveformatex to separate output pins? Or is there any other solution you can share with me? Thank you for any response.

Xsi

[IrinaM]

Hello Xsi,

You can use following graph:
Capture filter -> Inftee Filter -> AAC Encoder
                                          ...
                                          -> AAC Encoder

The number of encoders depends on the quantity of stereo pairs you want to be encoded.
For example, if you have 8 audio channels and you want to receive 4 stereo pairs then you need 4 AAC Encoders.
You should specify what exactly audio channels should be encoded and what channel should not for each encoder. You should use EMC_CHANNELS_CHOICE parameter for this purpose.

[Xsi]

Thank You very much Irina. I will give it a try. I hope that this is the solution that i was looking for.